Preparation
Surfaces must be clean, free of resins, oil, old weathered coatings and dust. Sand surface smooth using the right sandpaper for the task. Surface should not be cleaned with water before varnish application.
► New wood:
Apply 2-3 coats of POLACRYL 301 depending on the absorbency of the surface.
► New plaster, concrete, brick, cement:
Apply 2-3 coats of POLACRYL 301 depending on the absorbency of the surface.
► Old wood:
Use POLACRYL 305 to fill large gaps and cracks. Apply 2-3 coats of POLACRYL 301 depending on the absorbency of the wood.
► Old plaster, cement, brick, concrete:
Putty where necessary. Apply 2-3 coats of POLACRYL 301 depending on the absorbency of the surface.